Display Shield / Adapter for OLED display module with Arduino connectors compatible

DM-ADTAU-007

$9.99 $11.00

If you want the panel without the breakout board and/or larger quantities(10+) . Contact us for a quotation.

Category: Arduino, OLED

LinkedIn Email

Main features
- The board is an adapter which connects the 12 kinds of OLED display panels to the Arduino boards.
- Test for Arduino UNO compatible boards, compatible with Arduino Mega.
- Use SPI or I2C interface
- Works with DmOledLibrary
Physical Characteristics

Module Overall

Size 56.12 x 116.54 mm

Weight 32.2 g
Dimensions
Datasheets

DM-ADTAU-007

Schematics
DM-ADTAU-007 Schematics

Drawings

DM-ADTAU-007 2D Autocad drawings
You can use IGC's Brava! free DWG viewer to view the drawings
Source code and Resources

This board is made to work with the following display modules:

DM-OLED28-614/615, DM-OLED32-616/617/618/619 (for P1 connector); DM-OLED2002-608/609 (for P2 connector); DM-OLEDC13-621, DM-OLEDC15-622(for P3 connector); DM-OLEDC17-623 (for P4 connector); DM-OLED2002-602 (for P5 connector)
Application Reference

At first, it needs an Arduino board and one of OLED display module according the DM-ADTAU-007.
Then, you can install the product step by step:

1. Connect the DM-ADTAU-007 directly on top of an Arduino pin compatible device.

2. Connect the OLED display module on the relevant connector on the DM-ADTAU-007.

(For example, connect the DM-OLEDC15-622 to the P3 connector)