Main features

Embedded Artists' 1.35 inch Memory LCD Module adds graphics capabilities to your project.

The module used the LS013B4DN04 Memory LCD from Sharp, based an ultra low-power display technology. Power consumption is only 4µA with an up-date rate of 1Hz and as low as 2µA for a static image.

The display has an SPI interface and is simple to control. The display module connects to Embedded Artists' standard 14-pos expansion connector. Several of our products have the connector on-board. More modules are found here.

A small graphical library for the display, with basic drawing operations, can be downloaded from our support page after purchase of the display.

• 1.35"
• 96x96
• Based on display LS013B4DN04 from Sharp
• Display technology: reflective active matrix memory LCD module with CG silicone thin film transistors
• Display useful in daylight applications
• SPI interface
• Module supply voltage: 3.3V, the display is supplied with 3.0V via on-board LDO
• No backlight
• Operating temperature: -10 to + 60 degrees Celsius
• No of colors: 2 (silver and white)
• Standard 14 pos serial expansion connector interface (2x7 shrouded pin header, 100 mil spacing)
• 3.2 mm mounting holes in 22 x 41 mm pattern

Included in the kit

• One 1.35 inch Memory LCD Modules with display LS013B4DN014 from Sharp
• One 80mm 14 pos 100 mil pitch flat cable (serial expansion cable)
• Serial number that gives you access to the support site for this product

It is simple to interface the standard 14-pos serial expansion connector with any custom design. More information about this module can be found at Embedded Artists product page.