Main features

Embedded Artists' 1.5 inch RGB OLED Module adds color graphics capabilities to your project.

The module used the UG-2828GDEDF11 OLED from Univision Technology with integrated controlled chip SSD1351 from Solomon Systech.

The display has an SPI or 8-bit parallel interface and is simple to control. The display module connects to Embedded Artists' standard 14-pos expansion connector, and then uses the SPI interface. Several of our products have the serial expansion connector on-board. More modules are found here.

A small graphical library for the display, with basic drawing operations, can be downloaded from our support page after purchase of the display.

• 1.5"
• 128x128
• Display colors: 262144 (18 bit resolution)
• Based on display UG-2828GDEDF11 from Univision Technology
• Display technology: Passive Matrix OLED
• SSD1351 driver from Solomon
• 3 or 4-wire SPI or 8-bit parallel (8080 or 6800) interface
• Module supply voltage: 3.3V
• Operating temperature: -30 to + 70 degrees Celsius
• Two standard 14 pos serial expansion connector interfaces (2x7 shrouded pin header, 50/100 mil spacing)
• 20 pos connector for parallel interface (2x10 shrouded pin header, 100 mil spacing)
• 3.2 mm mounting holes in 40 x 47 mm pattern

Included in the kit

• One 1.5 inch RGB OLED Modules with display UG-2828GDEDF11 from Univision Technology
• One 80mm 14 pos 100 mil pitch flat cable (serial expansion cable)
• Serial number that gives you access to the support site for this product

It is simple to interface the standard 14-pos serial expansion connector with any custom design. More information about this module can be found at Embedded Artists product page.