New Adapter for OLED display module with Arduino connectors compatible
Nowadays, two kinds of adapter/shield for different OLED display modules with Arduino connector compatible is coming. This shields is designed by researchers for DisplayModule's products. And both adapter can directly connect to the Arduino boards and display modules.
Firstly, DM-ADTAU-007 is an adapter for the following OLEDs:
DM-OLED28-614, DM-OLED28-615, DM-OLED32-616, DM-OLED32-617, DM-OLED32-618, DM-OLED32-619 (for P1 connector); DM-OLED2002-608, DM-OLED2002-609 (for P2 connector); DM-OLEDC13-621, DM-OLEDC15-622 (for P3 connector); DM-OLEDC17-623 (for P4 connector); DM-OLED2002-602 (for P5 connector)
In addition, DM-ADTAU-010 is the other adapter for the following OLEDs:
DM-OLED1602-601 (for P1 connector); DM-OLED1602-606, DM-OLED1602-607(for P2 connector); DM-OLED1602-603, DM-OLED1602-604, DM-OLED1602-605, DM-OLED2004-610, DM-OLED2004-611 (for P3 connector); DM-OLED22-612 (for P4 connector); DM-OLED096-624, DM-OLED13-625, DM-OLEDC095-626 (for P5 connector)
En lire plus
Phase change displays could dramatically increase mobile phone battery life and Bodle Technologies has picked up ‘significant’ seed capital to develop them.
This TFT Touch screen is a fantastic shield with big (2.8" diagonal) and 240x320 pixels with individual pixel control which could apply to Arduino and mbed. It also comes with micro SD slot and 4 M...
Laisser un commentaire
Ce site est protégé par hCaptcha, et la Politique de confidentialité et les Conditions de service de hCaptcha s’appliquent.