Passer au contenu

Panier

Votre panier est vide

Explorer nos produits
What are the two types of OLED
17 sept. 20254 min de lecture

What are the two types of OLED

OLED displays fall into two families distinguished by how their pixels are addressed: PMOLED (passive matrix) and AMOLED (active matrix). The light-emitting organic layers are similar; the difference is the wiring and the electronics that decide when each pixel lights. That single difference sets the practical limits on size, resolution, cost and lifetime.

What both types share

Both use organic materials that emit light when current passes through them. Neither needs a backlight, so black is produced by switching the pixel off rather than by blocking light from behind. Both therefore deliver high contrast, wide viewing angles and low power when the image is mostly dark, and both lose that advantage when the image is mostly white and bright.

Both also share the failure modes of emissive devices: the organic materials age with accumulated current, and the ageing is not perfectly uniform across colours or pixels. This is the root of the burn-in concern that applies to OLED generally, not to one family only.

PMOLED: a simple matrix and a duty cycle

In a passive matrix the anode strips run in rows and the cathode strips in columns. To light a pixel, the driver energises its row and its column; the pixel at the intersection emits for the duration of that row's time slot. Lighting a full screen therefore means scanning rows one at a time, and each pixel is on for only a fraction of the frame — its duty cycle.

Two consequences follow directly. First, to achieve a given average brightness, the instantaneous current must be much higher than the average, because the pixel is on for a small share of the time. Second, as rows are added, the duty cycle falls, the required peak current rises, and the organic material ages faster. That is why passive matrix panels stay small — commonly in the character and small graphic formats where the row count is modest.

The compensation is simplicity: no transistor backplane, fewer mask steps, a simpler driver. For a two-line character display or a small icon panel, that simplicity is a real cost advantage.

AMOLED: a transistor per pixel

In an active matrix each pixel has its own thin-film transistor and storage capacitor. The driver writes a voltage to the pixel and the capacitor holds it for the whole frame, so the pixel emits continuously rather than for one row's time slot. Peak current demands drop, duty cycle stops limiting size, and higher resolution becomes practical.

The price is the backplane. A TFT array under an organic stack is the most expensive part of an AMOLED panel, and its uniformity — how closely one pixel's transistor matches its neighbour's — determines whether the panel shows a clean image or a mottled one. Compensation circuits in the driver exist to correct for exactly this variation.

Where the boundary sits in practice

The split is not a rule but a commercial pattern. Passive matrix dominates where the display is small, the content is simple, and cost matters more than perfect uniformity: character displays, small status panels, instrument readouts. Active matrix dominates where the panel is larger, the content is graphical, or the product needs high resolution in a small area — smartwatches, handhelds, VR optics.

There is an overlap zone in small graphic displays where both can be quoted. In that zone the decision usually turns on content: a static interface with large elements favours passive matrix, while fine text and gradients favour active matrix.

The failure modes are not the same

In a passive matrix the dominant ageing mechanism is the high instantaneous current density required by the low duty cycle. Pixels driven harder age faster, and total panel lifetime depends heavily on how bright the user runs it.

In an active matrix the dominant issues are transistor variation, which shows as uneven brightness, and differential ageing between colours, which produces the residual image known as burn-in when a static element stays on screen. Both families lose brightness over time; the shape of that loss differs.

Choosing between them

Four questions decide it in most projects:

  • How many rows? Small row counts suit passive matrix; large counts push toward active.
  • What content? Text and icons tolerate passive matrix; gradients and photographs need active.
  • How bright, and for how long? High brightness on a passive matrix shortens life quickly.
  • What is the cost ceiling? The TFT backplane is the reason active matrix costs more; if the budget cannot carry it, the answer is passive matrix with simpler content.

For reference, the two families sit alongside LCD in the wider display landscape, where the same trade between emitters and shutters recurs[1].

What to check on a datasheet

For either family, three figures matter more than the marketing description: the luminance at the intended operating point, the lifetime definition (hours to a stated fraction of initial luminance at a stated brightness), and the uniformity figure. The measurement basis for luminance and contrast is standardised in ISO 9241-307[2].

Both OLED families are listed in the AMOLED display collection and the PMOLED display collection; LCD alternatives that keep a backlight but avoid organic ageing are in the IPS display range.

Comparison of passive matrix and active matrix OLED display structures
Passive matrix addresses one row at a time; active matrix holds each pixel's charge in a capacitor for the whole frame.

The two types of OLED are PMOLED and AMOLED, separated by their addressing scheme rather than by their organic materials. Passive matrix keeps the driver simple and pays in duty cycle, which limits size; active matrix adds a transistor per pixel and pays in backplane cost. The choice follows from row count, content and brightness.

References

  1. Hilsum, C. (2010). Flat-panel electronic displays: a triumph of physics, chemistry and engineering. Philosophical Transactions of the Royal Society A, 368(1914), 1027–1082. https://doi.org/10.1098/rsta.2009.0247
  2. ISO 9241-307:2008 — Ergonomics of human-system interaction — Part 307: Analysis and compliance test methods for electronic visual displays. International Organization for Standardization. https://www.iso.org/standard/40102.html
Partager

Laisser un commentaire

Ce site est protégé par hCaptcha, et la Politique de confidentialité et les Conditions de service de hCaptcha s’appliquent.