7.0" IPS Display 1280x800 - LVDS
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Interested in customizing this product? Get in touch with us.
Order samples, immediate delivery.
Factory bulk lead time: 3 weeks.
Partager
7.0" IPS Display 1280x800 - LVDS
Prix de vente$69.00
7.0" IPS Display 1280x800 - LVDS
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Display Specifications
- Diagonal Dimension : 7.0 inch
- Resolution : 1280x800 pixel
- View Direction : -
- Touch Mode : None
- Module Dimension : 161.2 x 105.5 x 4.5mm
- Viewing Area : 150.72 (H) x 94.2(V) mm
- Supply Voltage : V
- Interface : LVDS
- Luminance : 400 cd/m2
- Drive IC : -
- Operation Temperature : -20℃~70℃
- Storage Temperature : -30℃~80℃
Dimensions
Resoures
HSD070PWW1-B00 Panel DatasheetDrawings
DM-TFT70-301 Autocad 2D Front View DrawingYou can use IGC's Brava! free DWG viewer to view the drawings
Settings for Raspberry Pi
Please use the following config file for optimal settings, please visit http://elinux.org/R-Pi_ConfigurationFile for more information about these settings.# uncomment if you get no picture on HDMI for a default "safe" mode #hdmi_safe=1 # uncomment this if your display has a black border of unused pixels visible # and your display can output without overscan disable_overscan=1 #overscan_left=-40 #overscan_right=-40 #overscan_top=-40 #overscan_bottom=-40 hdmi_drive=1 hdmi_group=2 hdmi_mode=28 # uncomment to force a console size. By default it will be display's size minus # overscan. #framebuffer_width=1280 #framebuffer_height=720 # uncomment if hdmi display is not detected and composite is being output hdmi_force_hotplug=1 # uncomment to force a specific HDMI mode (this will force VGA) #hdmi_group=1 #hdmi_mode=1 # uncomment to force a HDMI mode rather than DVI. This can make audio work in # DMT (computer monitor) modes #hdmi_drive=2 # uncomment to increase signal to HDMI, if you have interference, blanking, or # no display #config_hdmi_boost=4 # uncomment for composite PAL #sdtv_mode=2 #uncomment to overclock the arm. 700 MHz is the default. #arm_freq=800 # for more options see http://elinux.org/RPi_config.txt