MCU parallel
IM2/IM1/IM0 select 18-, 9-, 16- or 8-bit MCU operation. Route the data bus and read/write control signals for the selected width.
3.0" IPS Display 240x400 Resistive - SPI, MCU, RGB
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Interested in customizing this product? Get in touch with us.
Order samples, immediate delivery.
Factory bulk lead time: 3 weeks.
Partager
3.0" IPS Display 240x400 Resistive - SPI, MCU, RGB
Prix de vente$39.90
3.0" IPS Display 240x400 Resistive - SPI, MCU, RGB
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Resources & Downloads
DM-TFT30-418
3.0" IPS Resistive Touch Display · 240 × 400
DM-TFT30-418 is a 3.0-inch IPS TFT display with a 240 × 400 portrait matrix and a resistive touch panel. The ILI9327 controller supports MCU, serial and RGB interface options. The 39.24 × 65.4 mm display area is contained in a 45.04 × 77.0 × 3.9 mm module, with display, backlight and four touch terminals on the module connection.
Resolution240 × 400
Touch4-wire resistive
ControllerILI9327
Active area39.24 × 65.4 mm
Click to enlarge
A portrait format with four-wire input
DM-TFT30-418 · geometry overview
45.04 × 77.0 mm
Module outline · schematic view, not to scale
- Module outline
- 45.04 × 77.0 mm
- Module thickness
- 3.9 mm
- Visible area reference
- 39.24 × 65.4 mm active area
Use the dimensioned engineering drawing to position the cover opening and connection space. The illustration separates the image matrix from the physical module envelope.
Open the DM-TFT30-418 engineering drawing →Plan the interface around the format
A tall menu or equipment readout can use the portrait active area with resistive input. Evaluate the chosen touch-reading circuit, target sizes and calibration as part of the complete interface.
Resistive touch connection
X-axis terminals
Pin 42 · XR
Right glass terminal
Pin 44 · XL
Left glass terminal
Y-axis terminals
Pin 43 · YD
Bottom film terminal
Pin 45 · YU
Top film terminal
The four terminals connect the resistive touch layer to the host touch-reading circuit. Coordinate acquisition and calibration are handled by that circuit and its software. The module provides resistive terminals rather than an I²C capacitive touch controller.
Touch electrical limits
Film-side resistance
The touch specification lists 200–600 Ω for the film-side terminals.
Glass-side resistance
The glass-side terminal resistance is specified at 300–900 Ω.
Touch voltage limit
The touch panel specification lists a maximum voltage of 5 V. This limit applies to the touch layer and does not define the TFT supply voltage.
Display performance and backlight
Luminance
380 cd/m² typical
Power and backlight
Normal display current
8 mA typical
LED forward current
60 mA minimum / 80 mA typical
LED forward voltage
3.2 V typical
Optical and environmental details
Contrast ratio
400:1 minimum / 500:1 typical
Viewing angles
80° typical, each direction
Response time
35 ms typical / 50 ms maximum
Operating temperature limits
−20 to +70 °C
Storage temperature limits
−30 to +80 °C
Keep the display supply, LED drive and touch excitation requirements separate in the schematic. The module pin description specifies a 2.5–3.3 V supply for VCC pins 33–34; consult both the pin assignment and electrical section when choosing the supply rail.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product model | DM-TFT30-418 |
| Diagonal | 3.0 inch |
| Module dimensions | 45.04 × 77.0 × 3.9 mm |
| Pixel pitch | 0.1635 × 0.1635 mm |
| Display mode | Transmissive; normally black |
| Colors | 65K / 262K |
| Display interface | 8/9/16/18-bit MCU; 3/4-wire SPI + 16/18-bit RGB |
| Viewing direction | All directions |
Select the host interface
Serial control
The pin table identifies both 3-wire, 9-bit serial and 4-wire, 8-bit serial modes. WR also serves as the serial clock in DBI Type C mode.
RGB timing
The interface exposes VSYNC, HSYNC, PCLK and DE. Follow the module timing diagrams and ILI9327 register definitions when setting up RGB operation.
Add a host reading circuit for four-wire touch
The ILI9327 manages the image path. The resistive touch layer exposes four terminals for a host-side reading circuit; that circuit and the application provide coordinate acquisition and calibration.
HOST SIDEApplication processor
or MCUSelected to support the required display interface
or MCUSelected to support the required display interface
Selected MCU / serial / RGB mode⟶Interface selection + reset
DISPLAY SIDEILI9327240 × 400 image matrix
Touch → host
XR / YD / XL / YU · host reading circuit. Touch acquisition is separate from image transfer.
LED driver → backlight
Provide the specified LED drive independently of the panel logic supply. Include both paths in the power budget.
Functional connection overview for DM-TFT30-418. Use the module pin assignment for the circuit and connector design.
Resistive touch selection notes
Is a capacitive touch controller included?
This model exposes four resistive touch terminals: XR, YD, XL and YU. A host-side touch-reading circuit acquires coordinates; no FT-series I²C touch controller is specified for this SKU.
Does the touch voltage limit apply to the display?
No. The 5 V maximum belongs to the resistive touch layer. The TFT pin description separately specifies VCC pins 33–34 at 2.5–3.3 V.
What defines the touch-reading circuit?
The touch specification gives film-side resistance of 200–600 Ω and glass-side resistance of 300–900 Ω. The four-terminal pin assignment and these electrical limits are the reference for the host reading circuit.
Project Support from DisplayModule
DisplayModule provides documentation and engineering assistance for display integration. For DM-TFT30-418, include your display bus, four-wire resistive touch-reading circuit and calibration setup when contacting the team.
Discuss your integration
Use technical support for wiring or documentation questions. Include the model number, connection details and a description of the behavior you observe.
Plan samples and production
Standard models are available for sample evaluation. For volume orders or proposed modifications, request a quote with your quantity and requirements. Confirm the model-specific MOQ, schedule and customization feasibility with the team.
About DisplayModule · Contact details and service information
Download Official Datasheets & Resources
Use the DM-TFT30-418 module datasheet for dimensions, connection details and product-specific electrical and optical limits. The controller documents provide the related interface and command reference.