Zum Inhalt springen

Warenkorb

Dein Warenkorb ist leer

Weiter einkaufen

Knowledge

How PMOLEDs are Made | Manufacturing Process, Materials
31. Jan 2026
How PMOLEDs are Made | Manufacturing Process, Materials

PMOLED manufacturing involves ITO patterning and organic layer evaporation. It features no TFT, relies on row and column scanning, and is suitable for.

How Does COG LCD Works | Structure, Bonding Process
31. Jan 2026
How Does COG LCD Works | Structure, Bonding Process

COG (Chip-On-Glass) technology utilizes Anisotropic Conductive Film (ACF) to directly bond driver ICs onto the LCD glass substrate through thermal.

What is an AMOLED Display? | How It Works, Benefits & Uses
31. Jan 2026
What is an AMOLED Display? | How It Works, Benefits & Uses

AMOLED is a pixel self-emissive technology featuring an ultra-high contrast ratio of 1,000,000:1. Black pixels do not emit light, making it more.

OLED Technology Explained | Structure, Working Principle & Advantages
31. Jan 2026
OLED Technology Explained | Structure, Working Principle & Advantages

OLED relies on self-emission from organic layers, with a thickness of approximately 1mm. It features a 1,000,000:1 contrast ratio, a response time of.

How to Choose the Right Adapter OLED/LCD Module | Key Specs, Performance & Suppliers
31. Jan 2026
How to Choose the Right Adapter OLED/LCD Module | Key Specs, Performance & Suppliers

Selection requires matching I2C/SPI interfaces; OLED features a 100,000:1 contrast ratio, LCD targets 500 nits brightness; Confirm 3.3V/5V voltage.

COG LCD Modules | Custom Designs, Fast Prototyping & Mass Production
27. Jan 2026
COG LCD Modules | Custom Designs, Fast Prototyping & Mass Production

Customization requires first locking down the FPC shape and interface, with a prototyping cycle of about 15 days. During mass production, ACF thermal.

How COG LCD Works | Structure, Bonding Process
27. Jan 2026
How COG LCD Works | Structure, Bonding Process

The COG process utilizes Anisotropic Conductive Film (ACF) under thermal compression at approximately 200°C to directly bond the driver IC to the glass.

How PMOLED is Made | Manufacturing Process, Materials
27. Jan 2026
How PMOLED is Made | Manufacturing Process, Materials

Manufacturing requires the use of vacuum thermal evaporation technology to deposit an organic material layer with a total thickness of approximately 150.

PMOLED Advantages | Simplicity, Cost-Effectiveness & Performance
22. Jan 2026
PMOLED Advantages | Simplicity, Cost-Effectiveness & Performance

PMOLED leverages a TFT-free architecture to significantly reduce manufacturing costs, featuring an ultra-fast response time of 10μs and a wide viewing.