Panel electronics
VDD is 3.0 V minimum, 3.3 V typical and 3.6 V maximum. Normal panel current is 20 mA typical.
3.5" IPS Display 320x240 Capacitive - RGB
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Interested in customizing this product? Get in touch with us.
Order samples, immediate delivery.
Factory bulk lead time: 3 weeks.
Teilen
3.5" IPS Display 320x240 Capacitive - RGB
Angebot$44.90
3.5" IPS Display 320x240 Capacitive - RGB
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Resources & Downloads
DM-TFT35-371
3.5" IPS Touch Display · 320 × 240 · 24-bit RGB
DM-TFT35-371 combines a landscape 320 × 240 IPS TFT panel with capacitive touch. The ST7272A display controller uses a 24-bit RGB interface, and the FT6336G touch controller communicates separately over I²C. A 70.08 × 52.56 mm active area sits within the 76.9 × 63.9 × 4.4 mm assembly.
Landscape matrix320 × 240
Display bus24-bit RGB
TouchCapacitive
Luminance470 cd/m² typical
Click to enlarge
Landscape pixels and touch events follow separate paths
The RGB bus supplies pixel data and timing to the ST7272A. The eight-pin touch connection reports FT6336G touch data separately, allowing the host to combine both in a landscape interface.
HOST SIDEApplication processor
or MCUSelected to support the required display interface
or MCUSelected to support the required display interface
24-bit RGB⟶CSB / SCK / SDI + reset
DISPLAY SIDEST7272A320 × 240 image matrix
Touch → host
FT6336G · I²C. Touch acquisition is separate from image transfer.
LED driver → backlight
Provide the specified LED drive independently of the panel logic supply. Include both paths in the power budget.
Functional connection overview for DM-TFT35-371. Use the module pin assignment for the circuit and connector design.
RGB display and I²C touch architecture
Image path · RGB data and timing
Display data
Signals: B0–B7, G0–G7, R0–R7
Purpose: 24-bit RGB image input
Display timing
Signals: HSYNC, VSYNC, DCLK, DE
Purpose: Frame, line and pixel timing
Serial configuration
Signals: CSB, SCK, SDI
Purpose: Controller serial interface
Power and touch connections
Display power
Signals: VDD pins 41–42; GND pins 53–54
Purpose: Panel supply and return
Touch FPC
Signals: GND, VDDIO, VDD, SCL, SDA, INT, RST, GND
Purpose: Separate 8-pin touch connection
Use the display timing diagrams for SYNC, SYNC-DE or DE operation as appropriate to the host. The serial configuration pins are distinct from the RGB pixel bus and the I²C touch connection.
Power and optical specifications
LED backlight
Forward current is 15 mA minimum and 20 mA typical. Forward voltage is 18.6 V typical, requiring a backlight supply designed separately from the 3.3 V panel rail.
Touch electronics
The CTP supply table specifies 2.8 V minimum, 3.3 V typical and 3.6 V maximum, with a normal current of 4 mA typical.
Luminance
430 cd/m² minimum / 470 cd/m² typical
Contrast ratio
640:1 minimum / 800:1 typical
Viewing angles
70° minimum / 80° typical in each direction
Response time
30 ms typical / 40 ms maximum
Technical Specifications
| Parameter | Specification |
|---|---|
| Product model | DM-TFT35-371 |
| Diagonal | 3.5 inch |
| Module dimensions | 76.9 × 63.9 × 4.4 mm |
| Active area | 70.08 × 52.56 mm |
| Pixel pitch | 0.219 × 0.219 mm |
| Display controller | ST7272A |
| Touch controller | FT6336G |
| Touch mode | Single point and gestures |
| Display colors | 65K / 262K / 16.7M |
Design for the complete touch assembly
The TFT and touch sections specify different temperature limits. The TFT table lists −30 to +85 °C for operation and −40 to +85 °C for storage. The CTP table lists −20 to +70 °C for operation and −30 to +80 °C for storage. Use the touch section’s narrower limits when evaluating the complete assembly.
Mechanical fit
Check the 4.4 mm module thickness, FPC paths and enclosure opening using the product drawing. The active area is 70.08 × 52.56 mm.
Coordinate mapping
Confirm that touch coordinates match the displayed landscape orientation and any rotation applied in software. The specified touch behavior is single point and gestures.
Landscape space for touch controls
DM-TFT35-371 · geometry overview
76.9 × 63.9 mm
Module outline · schematic view, not to scale
- Module outline
- 76.9 × 63.9 mm
- Module thickness
- 4.4 mm
- Visible area reference
- 70.08 × 52.56 mm active area
Use the dimensioned engineering drawing to position the cover opening and connection space. The illustration separates the image matrix from the physical module envelope.
Open the DM-TFT35-371 engineering drawing →Plan the interface around the format
A landscape status panel or touch menu can use the wide active area. Evaluate text, controls and viewing position on the complete touch assembly, using its narrower temperature limits.
Selecting the complete touch assembly
Which orientation follows the module drawing?
The module specifies 320(RGB) × 240 and a 70.08 × 52.56 mm active area. These dimensions define the landscape display; software rotation does not change the physical opening.
Which temperature range applies to the touch assembly?
The CTP section specifies −20 to +70 °C operation and −30 to +80 °C storage. These narrower values govern evaluation of the complete touch assembly rather than the broader TFT-only figures.
Is backlight power supplied by the 3.3 V panel rail?
The backlight has a separate specification: 20 mA typical forward current and 18.6 V typical forward voltage. The panel electronics use a 3.3 V typical supply, so the two power requirements are distinct.
Project Support from DisplayModule
DisplayModule provides documentation and engineering assistance for display integration. For DM-TFT35-371, include your 24-bit RGB connection, touch orientation and complete-assembly temperature requirements when contacting the team.
Discuss your integration
Use technical support for wiring or documentation questions. Include the model number, connection details and a description of the behavior you observe.
Plan samples and production
Standard models are available for sample evaluation. For volume orders or proposed modifications, request a quote with your quantity and requirements. Confirm the model-specific MOQ, schedule and customization feasibility with the team.
About DisplayModule · Contact details and service information
Download Official Datasheets & Resources
Use the DM-TFT35-371 module datasheet for dimensions, connection details and product-specific electrical and optical limits. The controller documents provide the related interface and command reference.