Pixel data
The module exposes eight red, eight green and eight blue data lines for 24-bit RGB input, together with HSYNC, VSYNC, DCLK and DE.
3.5" IPS High Brightness Display 320x240 920nits - RGB
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Interested in customizing this product? Get in touch with us.
Order samples, immediate delivery.
Factory bulk lead time: 3 weeks.
Teilen
3.5" IPS High Brightness Display 320x240 920nits - RGB
Angebot$29.90
3.5" IPS High Brightness Display 320x240 920nits - RGB
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Resources & Downloads
DM-TFT35-387
3.5" High-brightness IPS Display · 320 × 240 · RGB
DM-TFT35-387 is a 3.5-inch landscape IPS TFT display with 320 × 240 pixels and a 24-bit RGB interface. The ST7272A controller drives a transmissive, normally black panel with a 70.08 × 52.56 mm active area. The module measures 76.9 × 63.9 × 3.17 mm and uses a ten-chip LED backlight.
Resolution320 × 240
Luminance920 cd/m² typical
Interface24-bit RGB
Module thickness3.17 mm
Click to enlarge
Separate pixel timing, register control and illumination
The host supplies RGB image data and timing, the serial lines configure the ST7272A, and the LED driver supplies the backlight. Each path can be checked independently during bring-up.
HOST SIDEApplication processor
or MCUSelected to support the required display interface
or MCUSelected to support the required display interface
24-bit RGB⟶CSB / SCK / SDI + reset
DISPLAY SIDEST7272A320 × 240 image matrix
LED driver → backlight
Provide the specified LED drive independently of the panel logic supply. Include both paths in the power budget.
Functional connection overview for DM-TFT35-387. Use the module pin assignment for the circuit and connector design.
Brightness with its measurement conditions
The backlight table lists 800 cd/m² minimum and 920 cd/m² typical luminance, with the luminance row specified at IF = 20 mA. It separately lists a typical forward current of 40 mA and a typical forward voltage of 15 V. Use these conditions explicitly when comparing the panel and selecting its backlight drive.
LCM luminance
Value: 800 min / 920 typ cd/m²
Condition / scope: IF = 20 mA, as specified in luminance row
Power and backlight
LED forward current
Value: 40 mA typical
Condition / scope: Backlight electrical specification
LED forward voltage
Value: 15 V typical
Condition / scope: Backlight electrical specification
LED count
Value: 10 chips
Condition / scope: Edge-lighting backlight
Optical and environmental details
Contrast ratio
Value: 640:1 min / 800:1 typ
Condition / scope: Normal viewing direction
Response time
Value: 30 ms typ / 40 ms max
Condition / scope: Tr + Tf
Viewing angles
Value: 70° min / 80° typ, each direction
Condition / scope: CR ≥ 10
Three parts of the host connection
Configuration
CSB, SCK, SDI and /RESET provide the controller configuration and reset connections. Follow the ST7272A document for register access.
Power and light
VDD is 3.0–3.6 V with 3.3 V typical; normal panel current is 31 mA typical. Provide the higher-voltage backlight drive through VBL+ and VBL− separately.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product model | DM-TFT35-387 |
| Diagonal | 3.5 inch |
| Module dimensions | 76.9 × 63.9 × 3.17 mm |
| Active area | 70.08 × 52.56 mm |
| Controller | ST7272A |
| Display colors | 65K / 262K / 16.7M |
| Display mode | Transmissive; normally black |
| Weight | 27 g |
Mechanical and environmental planning
Landscape aperture
Use the 70.08 × 52.56 mm active area to position the viewing opening. Check the complete module and FPC geometry against the mechanical drawing.
Temperature limits
The module lists −30 to +85 °C operating limits and −40 to +85 °C storage limits. Include the enclosure and backlight thermal conditions in the system design.
Optical characteristics are measured in a dark room at 25 ± 2 °C after a 15-minute warm-up. Final appearance also depends on the cover and surrounding lighting, so assess the finished assembly under its intended conditions.
A landscape panel with a 3.17 mm profile
DM-TFT35-387 · geometry overview
76.9 × 63.9 mm
Module outline · schematic view, not to scale
- Module outline
- 76.9 × 63.9 mm
- Module thickness
- 3.17 mm
- Visible area reference
- 70.08 × 52.56 mm active area
Use the dimensioned engineering drawing to position the cover opening and connection space. The illustration separates the image matrix from the physical module envelope.
Open the DM-TFT35-387 engineering drawing →Plan the interface around the format
The landscape format can be evaluated for instrument readouts or status interfaces that need a higher-luminance panel. Assess the cover and ambient lighting with a sample before setting an outdoor-readability requirement.
Understanding the brightness specification
What does the 920 cd/m² value describe?
It is typical module luminance, with 800 cd/m² minimum. The luminance row states IF = 20 mA; the backlight electrical table separately lists 40 mA typical forward current and 15 V typical forward voltage.
Does the specification establish sunlight readability?
No outdoor readability rating is established by the luminance figure alone. The supplied optical values describe the module under its stated measurement conditions; the cover and ambient light affect the finished display.
How are configuration and image data connected?
CSB, SCK and SDI provide serial configuration. The 24-bit RGB data bus and HSYNC, VSYNC, DCLK and DE carry image data and timing. Touch-named terminals are marked NC; no integrated touch function is specified.
Project Support from DisplayModule
DisplayModule provides documentation and engineering assistance for display integration. For DM-TFT35-387, include your RGB timing, LED driver and intended brightness measurement conditions when contacting the team.
Discuss your integration
Use technical support for wiring or documentation questions. Include the model number, connection details and a description of the behavior you observe.
Plan samples and production
Standard models are available for sample evaluation. For volume orders or proposed modifications, request a quote with your quantity and requirements. Confirm the model-specific MOQ, schedule and customization feasibility with the team.
About DisplayModule · Contact details and service information
Download Official Datasheets & Resources
Use the DM-TFT35-387 module datasheet for dimensions, connection details and product-specific electrical and optical limits. The controller documents provide the related interface and command reference.