0.71” AMOLED Microdisplay 1920×1080 FHD – 3135 PPI MIPI Near-Eye Display for AR/VR Smart Glasses & EVF
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Interested in customizing this product? Get in touch with us.
Order samples, immediate delivery.
Factory bulk lead time: 3 weeks.
0.71” AMOLED Microdisplay 1920×1080 FHD – 3135 PPI MIPI Near-Eye Display for AR/VR Smart Glasses & EVF
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Resources & Downloads
0.71" Micro AMOLED Display 1920×1080 FHD with MIPI DSI Interface
DMRXO0071FHNB is a 0.71-inch silicon-based active OLED micro display for near-eye display systems. The datasheet lists 1920×1080 resolution, 3135 PPI, MIPI DPHY 1-port / 4-channel interface, and a compact FPC-based structure for optical module integration and display evaluation.
For design-in review, confirm the electrical settings, connector matching, power sequence and optical configuration against the latest approved datasheet before sample evaluation or production planning.
Top-Emission OLED Silicon-based active OLED micro display structure
16.7M Colors Full-color version listed in the official datasheet
>10000:1 Contrast ratio stated in the datasheet
50-Pin Connection Connector item listed as HCTL, HC-PBB40C-50DS-0.4V-1.5-02
Verified Technical Specifications
Specifications below are based on the provided datasheet. Where the datasheet lists multiple series variants, confirm the exact emission type and configuration with DisplayModule before ordering.
| Parameter | Specification |
|---|---|
| Product Model | DMRXO0071FHNB |
| Display Technology | Top-emission, silicon-based active OLED micro display |
| Display Size | 0.71 inch diagonal |
| Resolution | 1920(H)×1080(V) |
| PPI | 3135 |
| Aspect Ratio | 16:9 |
| Color Mode | Full Color, 16.7M |
| Active Pixel | 1920(×3)×1080 |
| Sub-Pixel Point Size | 4.6µm × 4.68µm |
| Pixel Array | RGB Irregular Hexagon |
| View Area | 15.8139 mm × 9.0087 mm / 0.71" diagonal |
| Structure Size | 60.40 mm × 15.10 mm × 1.49 mm |
| Video Interface | MIPI only or MIPI + I²C, selected through IM[0] |
| MIPI Interface | MIPI DPHY v1.2, 1 port, 4 channels, 1.0 Gbps per channel |
| MIPI DSI Mode | MIPI DSI v1.01 R11 Video Mode |
| Refresh Rate | 25 Hz to 90 Hz |
| Gray Level | Digital 8 bit / Lv.256 |
| Typical Brightness | 500 cd/m² for color version; datasheet series also lists 2000 cd/m² mono white and 10,000 cd/m² mono green |
| Contrast Ratio | >10000:1 |
| Brightness Uniformity | >90% |
| Operating Life | 20,000 hrs |
| Typical Power Consumption | Typical values under +25°C ±2°C, all-white, 60 Hz test conditions: 285 mW color and 335 mW mono green; the datasheet series also lists 320 mW mono white |
| Power Supply | VDDI = 1.8V; AVDD = 5V to 5.5V; AVEE = -5V to -5.5V |
| Operating Temperature | -40°C to +65°C |
| Operating Humidity | ≤85%RH, without condensation |
| Storage Temperature | -55°C to +90°C |
| Net Weight | <2g |
| Controller / Driver | FHD02 Micro AMOLED Display Controller/Driver |
| Connector | 50-pin connection; connector item listed as HCTL, HC-PBB40C-50DS-0.4V-1.5-02 |
Optical, Electrical and Mechanical Details
This micro AMOLED display is designed for compact near-eye optical systems where resolution, pixel density, refresh rate and mechanical fit need to be reviewed together during design-in.
Optical Characteristics
- 0.71-inch diagonal view area for micro-display optical paths.
- 1920×1080 resolution with 3135 PPI pixel density.
- >10000:1 contrast ratio and >90% brightness uniformity.
- Color version typical brightness is listed as 500 cd/m².
Electrical Interface
- MIPI DPHY v1.2 with 1 port and 4 channels.
- Data rate is listed as 1.0 Gbps per channel.
- MIPI DSI v1.01 R11 Video Mode is specified.
- Interface configuration is listed as MIPI only or MIPI + I²C.
Mechanical Structure
- Structure size is listed as 60.40 mm × 15.10 mm × 1.49 mm.
- Net weight is listed as less than 2g.
- FPC-based connection with 50-pin interface definition.
- Connector item is listed as HCTL, HC-PBB40C-50DS-0.4V-1.5-02.
Connector and Interface Details
MIPI and I²C Integration
The datasheet lists support for MIPI only or MIPI + I²C. It also describes IM[0] selection for I²C and MIPI communication type, with display data written through MIPI. Review the datasheet pin definition and timing requirements before PCB layout and firmware setup.
- MIPI differential data pins include DATAN / DATAP lane pairs and CLK differential pins.
- I²C pins include SDA and SCL_WRX with 1.8V pull-up notation.
- RESX is listed as an active-low chip reset signal.
Resolution and Register Setup
The datasheet describes operation at 1920×1080 and includes register guidance for lower-resolution input formats such as 1440×1080 and 1280×1024. Confirm the register configuration, compression setting and timing with DisplayModule during sample evaluation.
- Frame rate is listed as 25 Hz to 90 Hz.
- VESA-DSC internal decoder support is listed for 3x and 3.75x compression ratios.
- Brightness adjustment is controlled through register settings described in the datasheet.
Reliability and Operating Conditions
The datasheet provides environmental and lifetime values that help customers review tolerance before sample testing, optical module design and product qualification planning.
Temperature Range
Operating temperature is listed as -40°C to +65°C. Storage temperature is listed as -55°C to +90°C.
Humidity Condition
Operating humidity is listed as ≤85%RH without condensation. End-product sealing and optical assembly conditions should be evaluated by the customer.
Lifetime Reference
Operating life is listed as 20,000 hrs. Confirm test conditions and brightness target before using this value in final product documentation.
Engineering Notes for Design-In
Items to Confirm Before Ordering
- Confirm whether the required version is full color, mono white or mono green.
- Confirm the target brightness, driving condition and thermal design.
- Confirm connector matching, FPC routing space and mechanical clearance.
- Confirm MIPI timing, register configuration and power sequence before PCB release.
- The provided datasheet does not define a finished touch panel or touch controller. If touch is required, confirm the touch configuration with DisplayModule before ordering.
Typical Application Review
This module can be reviewed for near-eye display systems, compact optical modules and customer display evaluation projects requiring a 0.71-inch FHD micro AMOLED panel.
For mechanical or optical changes such as cover glass, FPC adjustment or module-level customization, confirm feasibility with DisplayModule before placing a production order.
FAQ
What is the confirmed display size?
The official datasheet specifies a 0.71-inch diagonal view area for DMRXO0071FHNB.
What interface does it use?
The datasheet lists MIPI only or MIPI + I²C configuration, MIPI DPHY v1.2, 1 port, 4 channels, and MIPI DSI v1.01 R11 Video Mode.
Does this product include touch?
The provided datasheet does not define a finished touch panel or touch controller. If touch is required, confirm the touch configuration with DisplayModule before ordering.
What brightness should be used for comparison?
For the color version, the datasheet lists 500 cd/m² typical brightness. Mono white and mono green versions are listed separately in the datasheet series.
Can lower-resolution input formats be used?
The datasheet describes compatibility with lower-resolution input formats through register configuration. Confirm the exact setup with DisplayModule during development.
What should be checked before PCB design?
Review the 50-pin definition, connector item, power rails, reset signal, MIPI lane routing, I²C pull-up notation and timing configuration in the official datasheet.
Download Official Datasheet
Use the official datasheet to confirm dimensions, interface definition, electrical parameters, mechanical drawing and integration requirements before sample evaluation or product design.
Download Official Datasheet