Display Adapter for HDMI to eDP
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Interested in customizing this product? Get in touch with us.
Order samples, immediate delivery.
Factory bulk lead time: 3 weeks.
Display Adapter for HDMI to eDP
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Resources & Downloads
HDMI / VGA to eDP Display Adapter Board
The DM-ADTTR-012 is a display adapter board designed to convert compatible HDMI or VGA input signals to eDP output for LCD panel evaluation, embedded display development, and OEM integration projects.
Actual compatibility depends on the source output timing, target eDP panel specification, power supply, connector mapping, firmware settings, enclosure design, and final system validation. Confirm the target LCD panel and host source before prototype or production use.
Technical Specifications
| Parameter | Specification | Engineering Note |
|---|---|---|
| SKU | DM-ADTTR-012 | Use this model number when requesting documentation, samples, or configuration support. |
| Adapter Function | HDMI / VGA input to eDP output | Designed for compatible LCD panel evaluation and integration where eDP output is required. |
| Supported Resolutions | 1920 × 1080; 1920 × 1200 | Final operation depends on source timing, scaler configuration, and target panel compatibility. |
| HDMI Input | Up to 1920 × 1200 @ 60Hz | Verify source output timing and EDID behavior before integration. |
| VGA Input | Up to 1920 × 1200 @ 60Hz | VGA signal quality can vary by cable, source, and analog output stability. |
| eDP Output | 1920 × 1200 @ 60Hz | Confirm that the selected panel supports the required eDP timing and connector mapping. |
| Audio Frequency Range | 100Hz – 18,000Hz | Audio performance should be verified with the final speaker, enclosure, and supply design. |
| Audio Output | 2 × 3W, 4Ω, THD < 10% | Use a suitable speaker load and power margin for the final application. |
| Power Supply Voltage | 9V – 14V DC; typical 12V | Confirm current requirement under the selected LCD panel and audio load. |
| Board Dimensions | 107.0 mm × 55.0 mm | Check connector position, mounting clearance, cable bend radius, and thermal spacing. |
| Operating Temperature | −20°C to +75°C | Validate temperature performance in the final enclosure and operating environment. |
| Host Requirement | HDMI or VGA source with supported timing | Host operating system names should not be treated as a guarantee of compatibility; confirm video output mode instead. |
Adapter Architecture
HDMI / VGA Input
The adapter accepts compatible digital HDMI and analog VGA video inputs. For reliable operation, check the source resolution, refresh rate, cable quality, and signal stability before final integration.
eDP Panel Output
The output is intended for compatible eDP LCD panels. Panel timing, connector pinout, backlight requirements, and power sequencing should be reviewed before PCB or enclosure design is finalized.
Audio and Control
The board lists audio output and control options such as OSD, IR remote, and UART. Confirm the final control method, speaker load, and firmware configuration for your project.
Hardware Integration Checklist
Use the DM-ADTTR-012 as part of a validated display system rather than as a universal adapter. The source device, eDP panel, backlight design, power supply, cable length, enclosure, and user-control method all affect final performance.
Before prototype testing
- Confirm the target panel resolution, eDP timing, connector pinout, and backlight requirements.
- Verify HDMI or VGA source output at the required 60Hz timing.
- Use a stable 12V-class supply within the listed 9V–14V input range.
- Check audio load, speaker wiring, and enclosure acoustics if the amplifier output is used.
Before OEM integration
- Review mechanical clearance, mounting holes, connector direction, and cable bend radius.
- Validate thermal behavior and long-run display stability in the final enclosure.
- Confirm sample availability, bulk lead time, and any project-specific configuration before purchase.
Application Fit by Integration Need
LCD Panel Evaluation
Useful for evaluating compatible eDP LCD panels with HDMI or VGA source devices during early display selection and prototype testing.
Embedded Display Prototypes
Can support embedded display development where a compact HDMI/VGA-to-eDP bridge is needed. Final use should be validated at the system level.
Legacy Source Integration
May help connect VGA source equipment to compatible eDP panel builds, subject to source timing quality, panel support, and integration testing.
About DisplayModule Engineering Support
DisplayModule provides standard display modules, adapter boards, and custom display integration support for engineering teams moving from evaluation to production. For bulk or OEM projects, confirm documentation, sample availability, lead time, customization scope, and long-term supply requirements before hardware freeze.
Confirm Integration Details
Use the latest documentation to confirm mechanical drawings, interface timing, power requirements, audio output conditions, control options, and panel compatibility before PCB layout, enclosure design, or production ordering.