0.95" 180×120 AMOLED | SPI Interface, CTP, RM67160
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Interested in customizing this product? Get in touch with us.
Order samples, immediate delivery.
Factory bulk lead time: 3 weeks.
0.95" 180×120 AMOLED | SPI Interface, CTP, RM67160
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Resources & Downloads
SKU: DMGXO0095S8NA
0.95" 180×120 AMOLED Display Module with SPI Interface, CTP and RM67160 Driver IC
0.95-inch active matrix AMOLED display module for compact embedded products requiring a small active area, real RGB pixel arrangement, capacitive touch panel support and SPI command interface.
The module uses a 180 × 120 pixel display format, 16.7M color depth, 350 cd/m² typical luminance, 22.23 × 18.32 × 0.75 mm module size and RM67160 driver IC. It is suitable for wearable electronics, compact control panels, portable instruments and small-size HMI products.
180 × 120
Resolution
SPI
Interface
350 cd/m²
Typical Luminance
0.75 mm
Module Thickness
Core Product Specifications
| Parameter | Specification |
|---|---|
| Screen Size | 0.95 inch |
| Display Mode | AMOLED |
| Resolution | 180(W) × 120(H) pixels |
| Pixel Pitch | 111.3 × 111.3 μm |
| Pixel Arrangement | Real RGB arrangement |
| Active Area | 20.03(W) × 13.36(H) mm |
| Module Size | 22.23(W) × 18.32(H) × 0.75(T) mm |
| LTPS Glass Outline | 22.23(W) × 18.32(H) mm |
| Encapsulation Glass Outline | 22.23(W) × 16.72(H) mm |
| Glass Thickness | LTPS glass 0.2 mm / encapsulation glass 0.3 mm |
| Typical Luminance | 350 cd/m² |
| Color Depth | 16.7M colors, RGB 8-bit |
| Touch Mode | CTP |
| Interface | SPI |
| Driver IC | RM67160 |
| Weight | 0.83 g |
Electrical Characteristics and Power Conditions
Panel Power
ELVDD: 4.55 V min, 4.6 V typ, 4.65 V max.
ELVSS: -2.45 V min, -2.4 V typ, -2.35 V max.
Logic and Analog Supply
VDDIO: 1.65 V min, 1.8 V typ, 1.95 V max.
VCI: 2.7 V min, 2.8 V typ, 2.9 V max.
Normal Mode Condition
VDDIO = 1.8 V, VCI = 2.8 V.
60 Hz frame frequency at 25℃, 350 nits, command mode.
Optical Performance Data
Optical characteristics are specified under VDDIO = 1.8 V, VCI = 2.8 V and TA = 25℃. Typical luminance is 350 cd/m², with a specified range from 315 cd/m² to 385 cd/m².
Brightness uniformity is listed as 80% minimum and 90% typical. Viewing angle is specified at 80° minimum and 85° typical for left, right, top and bottom directions under CR ≥ 200. Contrast ratio is listed as 10,000 minimum and 100,000 typical. Response time is 2 ms typical and 4 ms maximum for white-to-black transition measurement from 10% to 90% luminance.
315 / 350 / 385 cd/m²
Min / Typ / Max Luminance
80% / 90%
Min / Typ Uniformity
80° / 85°
Min / Typ Viewing Angle
2 ms Typ
Response Time
Interface, Pin and Control Notes
SPI Signal Mapping
SDI is the serial input signal for SPI. CSX is the chip select input and is enabled low. SCL is the synchronous clock signal. SDO is used for serial output.
Command and Data Selection
D/CX selects display data or command mode. D/CX = 0 is command, while D/CX = 1 is display data or parameter.
Reset Requirement
XRES is active low and must be applied to properly initialize the chip. Reset low pulse width is specified as 20 μs minimum.
Touch Panel Pins
The pin definition includes touch panel traces X00, Y00, X01, X02, Y02 and X03, plus KEY_R and KEY_L connection pins.
Mechanical Design Reference
Module Outline
22.23(W) × 18.32(H) × 0.75(T) mm.
Active Area
20.03(W) × 13.36(H) mm.
Pixel Pitch
111.3 × 111.3 μm.
Integration Check
Verify FPC bending area, connector direction, touch routing and cover lens stack-up before enclosure tooling.
Reliability, Environmental and Compliance Data
Operating Temperature
-20℃ to +70℃ for 128 hours, with 0/5 failures listed in the datasheet reliability table.
Storage Temperature
-40℃ to +80℃ for 128 hours, with 0/5 failures listed in the datasheet reliability table.
Thermal Shock
-40℃ to +85℃, 0.5 hour dwell time, 50 cycles.
Certification Status
RoHS is listed. CE, FCC and other certifications are not listed in the datasheet certification section.
Technical FAQ
What driver IC does this AMOLED module use?
The module uses RM67160 driver IC.
Is the touch panel included?
The datasheet lists touch mode as CTP and includes touch panel trace pins in the pin definition.
What is the display interface?
The display interface is SPI. SDI, SDO, CSX, D/CX, XRES and SCL are listed in the pin definition.
What documents should engineers review before integration?
Review the datasheet, mechanical dimension data, pin definition, power supply sequence, reset timing and reliability test conditions before PCB and enclosure design.
Download Datasheet & Confirm Integration Details
Use the official datasheet to confirm pin definition, SPI signal mapping, power input range, reset timing, optical characteristics, mechanical dimensions and reliability conditions before evaluation.
For OEM and ODM projects, confirm sample availability, bulk lead time, compatible cover lens design, touch panel routing, inspection requirements and supply requirements with the engineering team.
Download Official Datasheet