2.4-Inch AMOLED Display 450×600 – MIPI MCU SPI Interface

V-style3 Color Arrangement

The module uses a V-style3 color arrangement. Each pixel is divided into either RED and GREEN sub-pixels or BLUE and GREEN sub-pixels.

Vertical Stripe Sub-Pixels

Two pixels share one RED or BLUE sub-pixel arranged in vertical stripes. This structure should be considered when evaluating pixel rendering, UI line sharpness, and small text display.

ICNA3312 Driver IC

The listed display driver IC is ICNA3312. Firmware integration should be verified against the official datasheet, including initialization commands and interface timing when provided in the technical documentation.

Module Outline

The module outline size is 38.6784 × 51.56 × 0.5 mm. Confirm housing clearance, front cover opening, bonding area, and assembly tolerance before tooling.

Active Area

The active area is 36.72 × 48.96 mm. Display window design should match the active area and allow proper alignment during assembly.

FPC and Connector

Check the FPC exit position, connector location, bend radius, board orientation, and wiring method from the official drawing before PCB layout.

MIPI Interface

Suitable for embedded platforms that require high-speed display communication. Confirm lane configuration, timing parameters, and initialization sequence from the official datasheet when applicable.

MCU Interface

Suitable for controller-based display designs. Confirm bus width, command protocol, frame update method, and memory write behavior before firmware development.

SPI Interface

Suitable for compact control designs where pin count and simple wiring are important. Confirm clock rate, command format, and display refresh requirements.

Power Input Range

Operating voltage is listed as 2.7 V to 3.8 V. Power sequencing, current limits, and absolute maximum ratings must be checked before board bring-up.

Electrical Check

Confirm voltage range, power rails, interface voltage level, connector pin assignment, and ESD handling requirements.

Firmware Check

Verify ICNA3312 initialization, display on/off commands, sleep mode behavior, scan direction, and frame write process according to the official technical documentation.

Thermal Check

Operating temperature is -30°C to 85°C. Validate the final enclosure under actual system heat conditions.

Assembly Check

Check FPC bend, module thickness, adhesive clearance, display window tolerance, and protective film removal process.

Wearable and Portable Devices

2.4-inch size, 4 g weight, and 0.5 mm thickness support compact product designs where space and weight are limited.

Portable Medical Device Interfaces

450×600 resolution and AMOLED display technology can be evaluated for portable medical device interfaces, handheld health monitors, and compact control panels after final optical, electrical, and regulatory validation.

Industrial HMI and Instruments

The -30°C to 85°C operating temperature range makes the module suitable for evaluation in industrial HMI, measurement tools, and compact instrumentation, subject to final system-level testing.

Consumer Electronics

MIPI, MCU, and SPI options provide integration flexibility for compact multimedia devices and embedded display products.

Custom Integration

Customization requests can be reviewed for interface configuration, form factor requirements, FPC layout, and project-specific integration needs.

Volume Order Review

For production orders, confirm MOQ, lead time, packaging method, inspection standard, delivery schedule, and sample approval process.

Quality Control Request

Before mass production, request the inspection criteria for appearance, electrical function, display defects, packaging, and batch traceability.

Datasheet-Based Validation

Use the official PDF datasheet for detailed specifications, electrical characteristics, interface protocols, mechanical drawings, and application guidelines.

Sample Testing Required

Confirm display color, UI readability, thermal behavior, firmware stability, and system compatibility using actual samples.

Published Data Scope

Brightness, contrast ratio, color gamut, lifetime, storage temperature, and certification data should be confirmed from official technical documents before publishing or procurement approval.