0.61” AMOLED Microdisplay 1024×768 XGA – 120Hz Silicon-Based Near-Eye Display for AR/VR & EVF
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Interested in customizing this product? Get in touch with us.
Order samples, immediate delivery.
Factory bulk lead time: 3 weeks.
0.61” AMOLED Microdisplay 1024×768 XGA – 120Hz Silicon-Based Near-Eye Display for AR/VR & EVF
- 💹 Enjoy a 20% discount for orders over 500
- 📉 A 15% discount is available for orders ranging from 200 to 499
- 🎁 A 10% discount is available for orders ranging from 50 to 199
- 🎁 A 5% discount is available when ordering 10-49
Resources & Downloads
0.61-Inch AMOLED Microdisplay — 1024 × 768 XGA, 120 Hz, Silicon-Based Near-Eye Display
The DMRXO0061XGNA is a 0.61-inch silicon-based color active matrix AMOLED microdisplay with 1024 × 768 XGA resolution and 12 µm × 12 µm pixels. It is built for compact near-eye display systems requiring high contrast, adjustable luminance, digital video input, and I²C register configuration.
RGB and YCbCr video input up to 120 Hz is supported. Connector mating, video timing, power sequence, optical targets, and project availability should be confirmed with DisplayModule before design-in.
Verified Technical Specifications
| Technical Parameter | Specification |
|---|---|
| Product Model | DMRXO0061XGNA |
| Display Type | Silicon-based color active matrix AMOLED microdisplay |
| Diagonal Size | 0.61 inch |
| Native Display Resolution | 1024 × 768 XGA; 1024 × RGB × 768 active resolution |
| Datasheet Pixel Array Reference | 1040 × 784 active pixels; use 1024 × 768 XGA as the native display resolution for system design |
| Resolution Support | 1024 × 768 to 640 × 480 |
| Pixel Size | 12 µm × 12 µm |
| Pixel Arrangement | RGB vertical stripe |
| Viewing Area | 12.3 mm × 9.23 mm |
| Gray Levels | 8 bits / 256 levels |
| Typical Luminance | 100 cd/m² |
| Adjustable Luminance Range | 40 cd/m² to 400 cd/m² |
| Luminance Uniformity | ≥90% at 200 cd/m² |
| Contrast Ratio | >10000:1 |
| White Chromaticity | CIE-x = 0.310, CIE-y = 0.330 |
| Frame Rate | 25 Hz to 120 Hz |
| Digital Video Interface | 24-bit RGB, YCbCr 8-bit / 16-bit / 24-bit, and 8-bit mono video input |
| Control Interface | Two-wire I²C serial interface |
| Power Supply | Analog/OLED array supply: 4.5 V to 5.5 V, nominal 5.0 V; digital IO and I²C supply: 1.62 V to 3.6 V, nominal 1.8 V |
| Power Consumption Reference | Basic-feature power consumption is listed as 62 mW at 60 Hz and 52 mW at 25 Hz. Under all-white 60 Hz nominal test conditions, the datasheet also lists total power values of 84 mW and 163 mW depending on VCOM and luminance condition. |
| Operating Temperature | -40°C to +65°C |
| Operating Humidity | ≤85% RH, non-condensing |
| Connector | 40-pin Hirose DF12(5.0)-40DP-0.5V(86), 0.5 mm pitch |
| Weight | Approx. 1 g |
| Assembly Stack Height Reference | 4.45 ± 0.1 mm |
| PCB Size Reference | 19.80 ± 0.1 mm × 15.20 ± 0.1 mm |
Optical, Electrical, and Mechanical Details
Near-Eye Optical Core
The 0.61-inch active area, XGA resolution, RGB vertical stripe pixel arrangement, and >10000:1 contrast ratio support compact optical-engine evaluation for near-eye display designs.
Power Budget Check
Power consumption changes with frame rate, luminance setting, VCOM condition, and image content. Use the official electrical tables for power-budget calculation on the target board.
Mechanical Fit
The structure reference lists 12.30 ± 0.1 mm × 9.23 ± 0.1 mm active area, 19.80 ± 0.1 mm × 15.20 ± 0.1 mm PCB size, and 4.45 ± 0.1 mm stack height.
Connector and Interface Details
40-Pin Connector
The datasheet identifies the connector as Hirose DF12(5.0)-40DP-0.5V(86), 0.5 mm pitch, for connection to the carrier PCB.
Digital Video Input
The pin definition includes VIDIN[23:0], VCLK, HSYNC, VSYNC, and DE. Supported input formats include 24-bit RGB, YCbCr input, and 8-bit mono input.
I²C Register Control
I²C_SCL, I²C_SDA, and I²C_ADDR0 pins are listed. Register functions include input mode, scan direction, active window size, gamma-related settings, temperature sensor, power saving modes, and test pattern generator.
Power Rails and Reset
The datasheet lists 4.5 V to 5.5 V for the analog/OLED array supply and 1.62 V to 3.6 V for digital IO and I²C supply. RESETB release timing should follow the power-up guidance in the datasheet.
Engineering Notes for Design-In
PCB Design
Check the 40-pin connector footprint, video signal routing, I²C pull-up design, RESETB timing, power sequence, and grounding layout against the official datasheet.
Optical Tuning
Confirm luminance target, contrast requirement, frame rate, active area alignment, viewing optics, and thermal condition during sample evaluation.
Touch Configuration
The provided materials do not confirm a touch panel or touch controller IC. Touch-related pins or touch specifications may be listed, but the exact touch configuration should be confirmed before ordering.
Application Areas
AR / VR Smart Glasses
Compact XGA microdisplay option for near-eye optical modules that require small display size and up to 120 Hz video input.
Electronic Viewfinders
AMOLED contrast, RGB vertical stripe arrangement, and I²C configuration support EVF evaluation for camera and instrument display designs.
Portable Optical Instruments
The 0.61-inch form factor, approx. 1 g weight, and 40-pin connector support compact optical-device development where space and weight are limited.
FAQ
What interface does this microdisplay use?
It uses CMOS-level digital video input with I²C register control. The product content lists 24-bit RGB, 16-bit YCbCr, and 8-bit mono input modes.
Does it support 120 Hz operation?
Yes. The datasheet states RGB and YCbCr video inputs up to 120 Hz, with a frame rate range of 25 Hz to 120 Hz.
Is touch included?
The provided datasheet does not specify a touch panel or touch controller IC. Confirm the exact touch configuration before ordering.
What should be checked before PCB design?
Review the connector, power rails, RESETB timing, I²C register setup, VCLK, HSYNC, VSYNC, DE, VIDIN[23:0], and the 60 Hz / 120 Hz timing tables.
Can the luminance be adjusted?
The datasheet lists contrast and brightness adjustment, typical luminance of 100 cd/m², and adjustable luminance from 40 cd/m² to 400 cd/m².
What operating temperature is listed?
The listed operating temperature range is -40°C to +65°C, with operating humidity up to 85% RH under non-condensing conditions.
Download Official Datasheet
Confirm dimensions, connector definition, electrical characteristics, video timing, register map, mechanical drawing, and integration requirements in the official DMRXO0061XGNA datasheet.
Download Official Datasheet