TFT screens for industrial HMIs must guarantee a backlight lifespan of 50,000 hours. Operationally, the touch panel must be bonded with 3mm tempered glass and programmed with thick-glove and waterp...
PMOLEDs for industrial HMIs must support wide-temperature operation from -40°C to +85°C and feature a 160-degree full viewing angle. Operationally, the hardware requires silicone reinforcement at t...
Monochrome PMOLED selection requires identifying an ultra-high contrast ratio of 10,000:1 and a wide viewing angle of 160 degrees to ensure readability. In terms of operation, it is necessary to se...
The tooling cost for a custom PMOLED is approximately $2,000 to $5,000, supporting circular or custom-shaped cutting. During operation, a CAD drawing containing the FPC pins and display area dimens...
The bending radius of wearable AMOLED reaches R2mm. Utilizing AOD and LTPO technologies to reduce the frequency to 1Hz can save 30% of power. Visibility is enhanced through 1000-nit peak brightness...
Driving a Micro OLED requires a 4-lane MIPI DSI interface supporting 1080P and a high frame rate of 90Hz, with a lane bandwidth reaching 1Gbps. The MCU must integrate hardware MIPI (such as the STM...
Monochrome Micro OLEDs, unblocked by color filters, can reach brightness levels of 100,000 nits and consume only one-tenth the power of full-color versions, making them highly suitable for displayi...
Micro OLED uses a monocrystalline silicon substrate, replacing the glass or plastic substrates of standard OLEDs, allowing its resolution to easily break through 3000 PPI, far exceeding the 500 PPI...
Micro OLED panels are the ideal choice for smart glasses. Their pixel density reaches 3000 to 4000 PPI, presenting high-definition vision without the screen door effect; The weight of a single scre...