128×64 COG · 2.61″
DM-COG12864-708 · ST7565R · FSTN positive transflective · 8080/6800 · 3.3 V · 55.0 × 27.5 mm active area · 25.5 g
$19.90View
Monochrome Graphic LCD · COG & Standard Modules
Graphic LCD Display Manufacturer & Supplier
We make 128×64 to 320×240 dot-matrix graphic LCDs in our factory — ST7565R, RA6963, S1D13700, RA8835, NT7086 controllers on board. Samples ship from stock, no MOQ. Need a custom FPC, cover glass, or different interface? We'll quote you in 24 hours.
- From $19.90
- 128×64 – 320×240
- 8080 / 6800 / 4-SPI
- FSTN · STN Blue
- −20°C to +70°C
Prefer email? Write to info@displaymodule.com — an engineer replies within 24 hours, Mon–Fri 9:00–17:00 (UTC+8).
No MOQsamples from stock
18 standard models128×64 up to 320×240
100% testedoptical + electrical, unit by unit
128×64 to 320×240ST7565R · RA6963 · S1D137008080 / 6800 / SPI / I2C3.3 V & 5 V logic−20°C to +70°CSamples from stock
10+Years in displays
50+Global markets
18Standard graphic LCDs
100%Tested before shipment
24hEngineering reply
What We Make
Six graphic LCDs buyers start with
Every product page has the datasheet, mechanical drawing, and pinout. Grab one piece to evaluate — no minimum order.
128×64 COG · 3.18″ SPI
DM-COG12864-705 · ST7565 · FSTN transflective · 4-SPI · 2.4–3.3 V · 76.1 × 44.5 mm outline · 31.2 g
$24.90View
160×128 · 5.12″
DM-LCD160128-465 · RA6963 · FSTN positive · parallel MPU · 5 V · 129 × 102 mm outline · 20-pin connector
$89.90View
320×240 · 6″ FSTN
DM-LCD320240-477 · S1D13700 · FSTN positive transflective · parallel MPU · 5.0 V (4.5–5.5 V) · 160.0 × 109.0 × 13.0 mm · 181.1 g
$129.00View
320×240 · 6″ Blue
DM-LCD320240-475 · NT7086 · STN negative blue · parallel MPU · 5 V ±10% · 160 × 109 × 13 mm
$109.00View
202×32 · 4.9″ Industrial
DM-LCD20232-480 · SBN1661G · STN positive yellow-green · parallel MPU · 146 × 43 × 13.7 mm
$39.90View
01
Datasheet + mechanical drawingActive area, outline, tolerances — ready for your enclosure design.
02
Pinout + controller manualST7565R / RA6963 / S1D13700 / RA8835 documentation linked from the product pages.
03
Init code on requestInitialization sequence for your MCU, so first pixels come up fast.
04
Tested before packingLuminance, chromaticity and dead-pixel check on every unit.
Quick Comparison
Nine modules, side by side
Published prices, real controllers, actual supply voltages — pulled straight from the product pages.
| Model | Size | Resolution | Display Mode | Controller | Interface | Supply | Price |
|---|---|---|---|---|---|---|---|
| DM-COG12864-708 | 2.61″ | 128×64 | FSTN positive | ST7565R | 8080/6800 | 3.3 V | $19.90 |
| DM-COG12864-705 | 3.18″ | 128×64 | FSTN positive | ST7565 | 4-SPI | 2.4–3.3 V | $24.90 |
| DM-LCD12864-459 | 3.0″ | 128×64 | FSTN positive transflective | RA6963 | Parallel MPU | 5.0 V nominal | $39.90 |
| DM-LCD20232-480 | 4.9″ | 202×32 | STN yellow-green | SBN1661G | Parallel MPU | 5 V ±10% | $39.90 |
| DM-LCD160128-465 | 5.12″ | 160×128 | FSTN positive | RA6963 | Parallel MPU | 5 V | $89.90 |
| DM-LCD24064-468 | 5.46″ | 240×64 | FSTN positive | RA6963 | Parallel MPU | 5 V ±10% | $75.90 |
| DM-LCD320240-477 | 6.0″ | 320×240 | FSTN positive transflective | S1D13700 | Parallel MPU | 5.0 V (4.5–5.5 V) | $129.00 |
| DM-LCD320240-475 | 6.0″ | 320×240 | STN negative blue | NT7086 | Parallel MPU | 5 V ±10% | $109.00 |
| DM-LCD320240-479 | 4.72″ | 320×240 | STN negative blue | RA8835 | Parallel MPU | 5 V | $129.00 |
| Also on the shelf: 128×64 slim 2.62″ · 128×64 COG 3.07″ MCU/SPI · browse the full graphic LCD collection | |||||||
Get a Quote in 24 Hours Not sure which one fits? Read the 3-minute selection guide or just email us your spec.
Custom Work
Standard not quite right? We modify the module
Most custom jobs start from our standard glass. We adjust the mechanics and interface around your product — faster and cheaper than a full custom panel.
FPC shape & connector position
Re-routed tails, custom pitches and connector footprints matched to your PCB.
Cover glass & mounting
Cover lens and mounting holes sized to your enclosure drawing.
Interface matching
8080/6800 parallel, SPI or I2C — matched to your MCU, not the other way round.
Backlight options
White edge LED as standard; brightness and color adjusted per project.
Init code & bring-up
Initialization sequences and engineer support until your screen shows pixels.
EOL & replacement sourcing
Panel discontinued? We source pin-compatible replacements through our manufacturer network.
Full scope of what we modify: custom display solutions.
About Our Factory
Assembled in an ISO-class cleanroom, tested one by one
We handle COG bonding and FPC integration on our own lines. Every module gets checked for luminance, chromaticity, and dead pixels before it ships.
- ISO-class cleanroom assembly
- Micron-level COG bonding
- Automated FPC integration
- Unit-by-unit optical + electrical test
How We Work
Sample to mass production in five steps
Step 01
Evaluation
Send your spec; pricing and technical comments back within 24 hours.
Step 02
Prototyping
EVT samples with initialization code, so your firmware team starts immediately.
Step 03
Design lock
Mechanical drawing, pinout and electrical limits frozen and documented.
Step 04
Mass production
Factory bulk lead time runs about three weeks with per-unit inspection.
Step 05
Lifecycle support
EOL notices and pin-compatible replacements sourced before you get stuck.
Why Work With Us
Buy one piece to test, stay for production
-
No MOQ, real stockOrder a single module today, scale to thousands on the same part number.
-
Engineers answer, not ticket numbers24/7 engineering support; init code and timing help included with samples.
-
Industrial temperature range−20°C to +70°C across the lineup, written into every datasheet.
-
One supplier, every display typeGraphic LCD beside character LCD, TFT and OLED — one RFQ covers the whole front panel.
-
Published pricing, no gamesEvery module lists its single-piece price online; volume tiers are fixed and public.
Volume pricing, printed on every product page
Automatic tier discounts on standard modules — your number before you even ask.
5% off10 – 49 pieces
10% off50 – 199 pieces
15% off200 – 499 pieces
20% off500+ pieces
Where It Works
Where these modules go to work
A monochrome graphic LCD is suited to long-term data display and low-power systems; sunlight readability depends on the selected LCD mode. FSTN transflective models are the appropriate choice where ambient-light readability is required.
-
Industrial HMI & control panels240×64 and 320×240 for menus, curves and status screens.
-
Test & measurement instrumentsRA6963 graphics modes render waveforms and readouts fast.
-
Medical & lab devicesCOG 128×64 keeps handheld and benchtop units thin and light.
-
Energy meteringTransflective FSTN stays readable with the backlight off.
-
POS & kiosk terminalsSTN blue 320×240 for high-contrast operator displays.
-
Embedded & Arduino prototypingDocumented controllers and public libraries shorten bring-up.
Building one of these? Tell us what the screen must do
Buy With Confidence
Payment, shipping and returns in plain terms
Secure card payment
Visa, MasterCard, Amex and Discover via Stripe — we only see the payment state, never your card details.
DHL / UPS worldwide
3–5 business days at $40, free over $800 (under 2 kg). Standard mail 15–25 days at $20, also free over $800.
5-day return window
Return or exchange within 5 working days of receipt if the module is not what you ordered.
30-day faulty replacement
A unit that fails on arrival is replaced within 30 days — every module was tested, and we stand behind that.
Spec ready? Samples ship from stock.
One email gets you pricing, stock status and engineer comments within 24 hours.
How to Quote
Six lines get you a quote in 24 hours
Copy this checklist into your email. The more you fill in, the tighter we can make that first reply.
-
1
Size & resolutione.g. 3-inch class, 128×64 — or a photo of the module you want to replace.
-
2
Display modeFSTN positive, STN blue, yellow-green — or just "readable outdoors".
-
3
Interface & voltage8080/6800 parallel, SPI or I2C; 3.3 V or 5 V logic.
-
4
ControllerST7565R, RA6963/T6963C, S1D13700, RA8835 — or the IC your firmware already drives.
-
5
Quantity & scheduleSample count now, estimated annual volume, target delivery window.
-
6
Operating conditionsTemperature range, viewing direction, backlight hours per day.
Quick Answers
Answers before you ask
Do you have a minimum order quantity?
No MOQ on standard graphic LCD modules. Single samples ship from stock, and volume pricing starts at 10 pieces with 5% off, rising to 20% at 500 pieces and above.
How fast can I get a quote and samples?
Engineering replies within 24 hours with pricing and technical comments. In-stock samples ship immediately; factory bulk orders run about three weeks of lead time.
Can you customize the FPC, cover glass or interface?
Yes. We tailor FPC shape and connector position, cover glass, backlight options and interface matching across 8080/6800 parallel, SPI and I2C, and our engineers supply initialization code and bring-up support.
Which controller ICs do your graphic LCDs use?
ST7565R on the COG 128x64 modules; RA6963 (T6963C-compatible) on the 128x64, 160x128 and 240x64 standard FSTN modules; S1D13700 on the 320x240 FSTN model; RA8835 and NT7086 on the 320x240 STN models; and SBN1661G on the 202x32 industrial module.
How do I pay, and how do you ship?
Visa, MasterCard, Amex and Discover via Stripe — we only see the payment state, never your card details. DHL or UPS takes 3-5 business days ($40, free over $800 under 2 kg); standard mail takes 15-25 days.
What if a module arrives faulty?
Return or exchange within 5 working days of receipt. Faulty products are replaced within 30 days, and our support team stays available 24/7 for engineering questions.
More Resources
Short reads before you decide
How to Choose a Graphic LCD
Interface, resolution and temperature range — the three decisions that matter.
Read
Products & Topics
Get In Touch
Send your spec. Get a quote in 24 hours.
One module or ten thousand — same engineers, same line. Samples ship from stock. Volume pricing is published. Every unit tested before it leaves the cleanroom.
info@displaymodule.com · +86-574-8756-6539
Mon–Fri 9:00–17:00 (UTC+8) · engineering replies within 24 hours · 24/7 support for ongoing projects